CLOTH DIAPERS 
                                            
Easy "QuickDry" AIO
Quick and Easy Fitted 
Fitted with Velcro
Fitted Front Snap
Fitted Side Snap 
All-In-One
Pre-Fold
Pre-Fold to Fitted
HB Pockets
Cloth Menstrual Pads

DIAPER  COVERS 

Ultrex/PUL with Snaps
Fleece with Snaps
Mother-Ease Air Flow

OTHER LINKS

Diaper Measurements
Approx $$
FAQ
Sew and Show Page

 

 

Quick and Easy Fitted Diaper

 

This is an extremely easy diaper to make. You can easily make a dozen in a few hours.  I made a dozen
of these in newborn size.  I used birdseye on the outside and stretch terry on the inside. 

I got this template from a combination of a disposable and a
 Snuggle-up diaper (I think that's what it's called).
Mark on your fabric where you want your elastic. This diaper
 only has elastic in the legs.
Cut out your pad. I used 3 layers of stretch terry. The pad
 extends the entire length of the diaper.  Sew it onto one layer
 of the diaper, on the inside. Sew a zig zag down both sides of
 the pad.
Next, sew the elastic onto the legs. Sew it on the same side as
 the pad.
Serge the two diaper layers together with the pad and elastic
 between the two layers. Be sure to catch in the ends of your
 pad...remember the pad extends all the way to the front and
 back of the diaper.
Sew a strip of loop Velcro to the front of the diaper through all
 the layers.  Sew a piece of hook Velcro onto each wing. Sew
 some loop Velcro for fold back tabs if you wish. 
And your done! Simple and Easy!!

HOME

Copyright 1999-2009 Debi Elrod.
All rights reserved.

Hosting and Web Services Sponsored and Supported by The Home Search Place